Maxwell

REMOTE UP/DOWN CONTROLEasy to use panel-mounted Up/Down switch for remote windlass operation from the helm, flying bridge or cockpit. Available fo...

Maximum Pull: 1320lbs The larger RC8-8 can be used with 8mm (5/16") chain spliced to 14mm (9/16") three strand or 8-plait rope. The ingeniously d...

The RC6 utilizes 6mm/7mm (1/4") chain spliced to 12mm (1/2") three strand or 8-plait rope. Maximum Pull: 660lbs. Providing most of the featu...

RC12/10 12V WindlassThe RC12 fully automatic windlass series is designed to effortlessly retrieve and deploy 10mm (3/8") short link chain and 16mm...

RC10 Automatic Rope/Chain Windlass Designed for 5/16" chain and 5/8" rope combination Maximum pull: 1540 lbs Metric Chain Size: 8mm Motor Watt...

RC10 Automatic Rope/Chain Windlass Designed for 3/8" chain and 5/8" rope combination Maximum Pull: 1870lbs. Metric chain size: 10mm Motor Watta...

RC8-6 Vertical Windlass 1/4" Chain, Rope 1/2" 12vPackage Includes Windlass On/Off Breaker Panel Reversing Solenoid Up/down Panel Switch Emerg...

Quick Release ClipWindlass Quick Release Clip

Pressure Arm Upper 8mm - 5/16" CWFeatures: Pressure Arm Upper 8mm 5/16" CW

Pressure Arm Upper 3/8" ChainMaxwell Pressure Arm Liberty 2500 3/8" Chain

PM Solenoid Pack - 12VMaxwell's PM Solenoid Pack that is 12V.This product may not be returned to the original point of purchase. Please contact t...

Plunger/Spring Kit - 2200-4500Maxwell Plunger/Spring Kit for VWX - 4 of each

Pin RollMaxwell Pin Roll spare part

FOOTSWITCHMaxwell heavy-duty, weather resistant units have a UV stabilized water proof diaphragm and are supplied complete with mounting instructi...

FOOTSWITCHMaxwell heavy-duty, weather resistant units have a UV stabilized water proof diaphragm and are supplied complete with mounting instructi...

FOOTSWITCHESMaxwell heavy-duty, weather resistant units have a UV stabilized waterproof diaphragm and are supplied complete with mounting instruct...

P10068 Motor - 12VPermanent magnet replacement windlass motorUsed in the Freedom 500, VC500, VW500 and the VWC500 windlassesThis product may not b...

Motor Cima - 1200W - 24V - 4-Hole Flange 24V 1200W DC 3500RPM IP66 Diameter: 114 x 181mm This product may not be returned to the original point of...

Motor Cima - 1200W - 12V - 4-Hole Flange 12V 1200W DC 3500RPM IP66 Diameter: 114 x 181mm This product may not be returned to the original point of...

Maxwell Marine Replacement Windlass StripperFeatures: Applications: Maxwell Liberty 1700 Windlass Chainwheel: 5/16" Includes Assembly Screw

Levered Chain Stopper f/5/16" or 8mm ChainChain stoppers hold the chain and take the load off the windlass. They are used to set and ride on the a...

Levered Chain Stopper f/3/8" or 10mm ChainChain stoppers hold the chain and take the load off the windlass. They are used to set and ride on the a...

Label 3500Maxwell 3856 Round Label 3500

Kit Liberty Stripper Assembly - 10mm - 3/8" ChainFeatures: Maxwell Marine Replacement Windlass Stripper Applications: Maxwell Liberty 2500 Windlas...

Kit Freedom Key - WasherMaxwell key/washer kit for Maxwell Freedom series windlasses.

Key 300-150010mm x 90mm x 60mm

The all new compact HRC6 and HRC8 are Maxwell's horizontal versions of the latest innovative new vertical RC6 and RC8 automatic rope/chain windlas...

The all new compact HRC6 and HRC8 are Maxwell's horizontal versions of the latest innovative new vertical RC6 and RC8 automatic rope/chain windlas...

HRC10 Horizontal Rope Chain Windlass - 12V Capstan 3/8" Chain, 5/8" RopeMaxwell's HRC10 represents yet another breakthrough in performance and anc...

HRC 10-8 Horizontal Windlass 5/16" Chain, 5/8" Rope, 12V, with CapstanDesigned for boats up to 45 feet, the HRC10-8 Horizontal Series windlasses p...

Hinged Bow Roller - Size 2Suitable for rope and chain anchor rodes utilizing up to 13mm (1/2") chain.Size 2: L - 430mm (16-15/16") B - 160mm (5-5...

Hinged Bow Roller - Size 1Suitable for rope and chain anchor rodes utilizing up to 13mm (1/2") chain.Size 1: L - 320mm (12-5/8") B - 92mm (3-5/8...

Gearbox KeyMaxwell Windlass Gearbox Key 31509.53X, 9.53X67 ST ST

Freedom Shaft Service KitMaxwell shaft service kit for Maxwell Freedom series windlasses.

Pressure Arm Upgrade KitMade specifically for Maxwell's Freedom Series of Windlasses.

Fixed Bow Roller w/LoopMaxwell also featurs a Fixed Bow Roller with an Anchor Loop.Fixed with Loop: A - N/A B - 134mm (5-1/4") C - 75mm (3") D ...

Fixed Bow Roller - Size 2Suitable for rope and chain anchor rodes utilizing up to 13mm (1/2") chain.Size 2: L - 320mm (12-5/8") B - 86mm (3-7/16"...

Extendable Hinged Bow RollerExtendable Hinged Bow Rollers have a hinged base which allows for shorter or longer overall extension.Extendable Hinge...

Economy Chain Stopper f/5/16", 3/8", 8mm & 10mm ChainChain stoppers hold the chain and take the load off the windlass. They are used to set an...

Clutch Nut RC8 Freedom - 500/800Features:Replacement clutch nut for Freedom rope / chain windlassSpecifications:Maxwell Model No. 4376

Circlip Extension 1-1/8" Stainless Steel - 3100-112-SS2Features: 1-1/8" Stainless Steel

Circlip - 1-1/2" Stainless Steel 1-1/2" Stainless Steel

Bush 1/2" NylonFeatures: 1/2" Nylon 741 330B

Bearing Kit 300-3500Spare gearbox bearing kit for Maxwell VC1000 windlass. Kit includes: (2) 1" ext circlip, (1) 12 x 28 x 8 ball bearing, (1) 25 ...

ANCHORMAX™ WindlassFeatures: Has an extremely high power to weight ratio ompact, fully sealed gearbox is driven by a vertically mounted, permanen...

Anchor Tensioner 7-12mmFeatures: Pulls anchor tight to keep it snug in the bow roller Takes weight off the windlass and prevent accidental deploy...

ANCHOR SWIVEL SHACKLESThe use of a swivel and joining shackles to join your anchor and rode will greatly improve anchor retrieval and help ensure ...