View our list of the best brands of Transducer Accessories and then purchase your Transducer Accessories at discount prices from CE Marine.
We offer flat rate shipping and can help you locate hard to find items or we can recommend alternatives.
Call us today at 1-414-254-1559 for personalized service and help locating / replacing hard to find marine electrical equipment.
Trolling Motor Shaft Mount for Panoptix™ LVS32Mount a compatible Panoptix transducer on the shaft of your trolling motor with this kit. It's adjus...
View full details
Save 3%
8-Pin Female to Wire Block AdapterGarmin's adapter allows you to connect the wires on legacy 6-pin transducers with newer sonar that requires an 8...
View full details
Save 10%
Garmin 12-Pin Mix & Match Cable for Chirp TransducersAirmar's Garmin Mix & Match CableFeatures: 12-Pin Specifically for Chirp Transducers ...
View full details
60WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding o...
View full details
Save 5%
60WR-2 Transducer Hull Nut WrenchA single-handed wrench to tighten the hull nut on 2" bronze and stainless steel housings. You can use wrench 60WR...
View full details
75WR-3 Double Handle Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holdin...
View full details
Save 10%
164WR-2 Transducer Hull Nut WrenchA single-handed wrench to tighten the hull nut on B164, SS164 and SS264 housings.You can use wrench 164WR-4 to b...
View full details
Save 11%
Furuno 10-Pin Mix & Match Cable for 600W Non-CHIRP TransducersMix and Match 600W transducers are made as a common base transducer with a short...
View full details
4-Pin Transducer to 8-Pin Sonar PortConnect a 4-pin transducer to an 8-pin sonar port on your compatible marine device with this adapter cable.WAR...
View full details
8-Pin Transducer to 4-Pin Sounder Adapter CableConnect an 8-pin transducer to a 4-pin sonar port on a compatible marine device with this adapter c...
View full details
Suction Cup Transducer AdapterUsing your fishfinder as a portable unit? Use this suction cup adapter to attach your transom mount transducer to th...
View full details
Save 2%
Extension Cable with XID - 12-Pin - 30'Extend the cable length of your compatible 12-pin transducer with this 30 foot (9 meter) cable. Supports 1...
View full details
8-Pin Transducer to 12-Pin Sounder Adapter Cable w/XIDUse this adapter cable to connect an 8-pin transducer with XID to a 12-pin sonar port on a c...
View full details
Save 10%
EC M10 Transducer Extension Cable - 10'10' extension cable for transducers. Current Models: ICE HELIX, ICE Flashers, PiranhaMAX, HELIX 5, HELIX 7...
View full details
12-Pin Pigtail Cable for TZT3Furuno's 12-Pin Pigtail Cable specifically for TZT3.This product may not be returned to the original point of purchas...
View full details
RealVision 3D Transducer Extension Cable - 5M(16')RealVision 3D Transducer Extension Cables work with both the transom mounted RV-100, as well as ...
View full details
12-Pin XDR Extension Cable - 10MFeatures: Extension Cable For Furuno Transducer 10M (33' Length) 12-Pin Color: Black This product may not be retur...
View full details
A80328 Adapter CableProduct Compatibility: Single B75/B175 Operation Cable Specifications: Type: Adapters Box Dimensions: 2"H x 9"W x 12"L WT: 0.4...
View full details
Locking Collar Kit for RealVision 25-PinRaymarine Spare RealVision 25-pin locking collar kit
CPT-DV/CPT-DVS Mounting KitTransom Mount Bracket for CPT-DV & CPT-DVS Specifications: Type: Mounting Brackets Box Dimensions: 2"H x 6"W x 8"L ...
View full details
Save 10%
MHX XNPT Portable Hardware KitMounting hardware and suction cup for portable XNT transducers. WARNING: This product can expose you to chemicals ...
View full details
Save 10%
AD XTM 9Transducer Mounting HardwareThis hardware kit adapts to our standard transom mount transducers in the list below for use on the trolling m...
View full details
Save 9%
Mounting hardware for the XNT transom mount transducers. Includes a kick up bracket.WARNING: This product can expose you to chemicals including L...
View full details
Save 10%
MM1-DST-8G Mix and Match™ Garmin Blue 8-Pin CableMix and Match 1kW transducers are made as a common base transducer with a short (2m) cable attach...
View full details
Save 11%
Mix & Match Cable for Raymarine 600W Non-CHIRP Transducers - 9mMix and Match 600W transducers are made as a common base transducer with a shor...
View full details
Trolling Motor Barrel Mount for Panoptix™ LVS32Mount a compatible Panoptix transducer on the barrel of your trolling motor with this kit. It is ea...
View full details
117WR-3 Double Handle Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holdi...
View full details
Save 10%
Raymarine 11-Pin High or Med Mix & Match Transducer CHIRP Cable for CP470 Airmar MMC-11R CHIRP Mix and Match Transducer Cable 1M Raymarine 11-...
View full details
Save 10%
Humminbird 9-Pin Mix & Match Chirp Cable - 1MAirmar's Mix & Match Chirp Cable for Humminbird.Features: Length: 1M 9-Pin This product may n...
View full details
Save 10%
Humminbird 14-Pin Mix & Match Chirp Cable - 1MAirmar's 14-Pin Mix & Match Chirp Cable for HumminbirdFeatures: Length: 1M 14-Pin Specifical...
View full details
Save 10%
Garmin 8-Pin Mix & Match Chirp Cable - 1MAirmar's 8-Pin Mix & Match Chirp Cable specifically for Garmin.Features: 8-Pin Length: 1M Chirp C...
View full details
Save 2%
Perspective Mount for LVS62 TransducerThe perspective mode mount takes your LiveScope™ XR real-time scanning sonar to the next level. Attach your ...
View full details
Transom Mount BracketEasily attach your compatible 4-, 8- or 12-pin transducer to the transom of your boat with this mount that provides excellent...
View full details
117WR-4 Transducer Housing WrenchA single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the side of the housing to...
View full details
117WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding ...
View full details
60WR-4 Transducer Housing WrenchA single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the side of the housing to ...
View full details
Save 10%
Furuno 12-Pin Mix & Match Cable for CHIRP Dual Element TransducersFor use with Airmar's Mix and Match CHIRP transducers up to 1kW (1,000 watts...
View full details
Save 11%
MM-HB Mix & Match™ Cable 5-Pin 600W Series with Humminbird #9 Connector - 9MSpecifications: Sensor Connector: MM Display Connector: HB Mix and...
View full details
Save 11%
MM-9N Mix & Match Cable for Simrad XSONIC Non-CHIRP TransducersMix and Match 600W transducers are made as a common base transducer with a shor...
View full details
Save 28%
Deadrise Angle Finder - Accuracy of ± 1/2°Accurate to 1/2 of 1°, this precision instrument, with strong ceramic magnet is designed for attachment ...
View full details
Save 11%
164WR-3 Double Handle Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holdi...
View full details
6-Pin Female to 8-Pin Male AdapterThis adapter allows you to connect newer 8-pin transducers to devices that require a 6-pin connector.WARNING: Th...
View full details
Save 28%
Replacement Transducer Bracket for Plastic Transom Mount Transducer with Depth & TempThis replacement Transducer Bracket is for the plastic tr...
View full details
Save 3%
Transom Mount Bracket f/Livescope Plus LVS34Easily attach your compatible LiveScope™ transducer to the transom of your boat with this stainless st...
View full details
Save 10%
EC M30 Transducer Extension Cable - 30'30' extension cable for transducers. Current Models: ICE HELIX, ICE Flashers, PiranhaMAX, HELIX 5, HELIX 7...
View full details
Save 24%
Transom Mounting Bracket for P66 Transducer - 2004 & upThis product may not be returned to the original point of purchase. Please contact the...
View full details
175WR-4 Transducer Housing WrenchA single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the top of the housing to ...
View full details
Save 2%
Transducer Extension CableUse this 10' (3M) extension cable to connect your 4-pin transducer to your sonar unit.Compatible Devices: echo™ 100 ech...
View full details