Busbars, Connectors & Insulators

C4009 CableCap - Black 0.47 to 0.13 StudFeatures:Insulate stud type connectors on alternators, starters, windlasses and other high amperage device...

VDB2 2-Position Distribution Block with CoverT-Spec designed their VDB2 distribution block to handle the high-current power distribution for two (...

4008 CableCap - Red 0.47 to 0.13 StudFeatures:Insulate stud type connectors on alternators, starters, windlasses and other high amperage devicesWA...

4014 CableCap - Red 1.25 to 0.70Features:Insulate stud type connectors on alternators, starters, windlasses and other high amperage devicesWARNING...

2508 Terminal Block 30AMP - 8 CircuitFeatures: Closed back design completely insulates power from the mounting surface Each screw pair is 1 isolat...

Dual Buss Bar with Cover - 12 TerminalsThis dual bus bar is designed for DC positive or negative distribution on one block or AC neutral and safet...

CableCap - Black 1.25 to 0.70Features:Insulate stud type connectors on alternators, starters, windlasses and other high amperage devicesWARNING: T...

6 x 5⁄16- 18 Stud TerminalPart# 2126 SpecificationsContinuous Amperage t250 Amperes AC/DCVoltage Rating t300 Volts AC Maximum / 48 Volts DC Maximu...

Terminal Feed Through ConnectorsEliminates chage and provides strain relief when passing high current through hulls, decks and bulkheads.Features:...

2302 150AMP Common BusBar 20 x 8-32 Screw TerminalFeatures: The industry standard busbar for positive distribution The industry standard busbar fo...

2300 150AMP Common BusBar 10 x #8-32 Screw Terminal with CoverFeatures: Stud design provides direct terminal to bus contact for low resistant conn...

ATC Six Way Bus Bar with 5mm Input StudThe ATC Negative Bus uses the BEP Contour lock system to allow it to be joined to the ATC fuse holder. This...

Power Post 1/4 - 20 Stud• Insulated bases are glass-reinforced Nylon• All fasteners are galvanically compatible to reduce corrosion (ABYC E-11.16....

2722 DualBus Plus 1/4" Stud, 5 x 10-32 Screw TerminalFeatures: Combines negative and positive buses on one block Clear polycarbonate cover snaps o...

2151Features: New isolated stud design uses standard 5/16" hardware and permits stacking of terminals Compact, high-amp fuse-Appropriate for DC ...

2002 PowerPost High Amperage Cable Connector 5/16" Stud Insulated single stainless steel stud terminates multiple large conductors.Features: Conne...

1003 CableClam 1.39" Features: Perfect for antenna installation Waterproof co-axial installation without removing connectors Save the expense of r...

9218 Terminal Block Jumpers for 2400 Series Blocks - Package of 5Features: Jumpers allow creation of common circuits on independent connectors Fit...

ST CLB Circuit Breaker Block Jumper - Package of 5Specifications:5 per retail packageWARNING: This product can expose you to chemicals including d...

Buss Bar with Cover - 6 TerminalsThis bus bar is designed for positive or negative DC distribution or collection of AC neutral or safety ground ci...

BB-8 Bus BarIdeal as a DC ground tie point or positive bus, this heavy-duty, 500-amp-rated bus bar assembly features 5/16 in. studs on 1 in. cente...

BB-2 Bus BarIdeal as a DC ground tie point or positive bus, this heavy-duty, 500-amp-rated bus bar assembly features 5/16 in. studs on 1 in. cente...

5503 Cover included Accepts 5/16" (M8) ring terminals For use on systems up to 32 Volts DC Swing out design allows replacement of the fuse without...

500A 4 Stud Buss barPro Installer buss bars are designed for flexibility and scalability. The snap-out side skirts allow for additional cable entr...