Electrical Accessories

Venus GX Control - No DisplayFeatures: Venus GX The Venus GX provides intuitive control and monitoring for all Victron power systems. The list of ...

VE. Direct - 10M Cable (1 Side Right Angle Connector)Features: Cable Length: 10M 1 Side Right Angle Connector Warranty InfoWARNING: This product c...

GX Touch 70The GX Touch 70 is a display accessory for our Cerbo GX. The seven-inch touch screen display gives an instant overview of your system a...

Phoenix Inverter Control VE.DirectThis panel is intended for Phoenix Inverters equipped with a UTP remote monitoring and control socket.  It can a...

VE Direct Cable - 10MThe VE.Direct cable is available in different lengths. There is a straight and 90 degree angle model.  Quick Guide (pdf)

Battery Switch 275A 12-48VDC Surface or Panel MountThe Battery Switch ON/OFF 275A is suitable for battery systems up to 48V. It has a unique ergon...

VE.Can RJ45 Terminator - Bag of 2This bag contains two VE.Can RJ45 terminators. The terminators are included with some other Victron products, for...

GX Touch 50 Protection CoverThe GX Touch 50 protection cover prevents damage from UV light during prolonged exposure to the sun. Specification:Mod...

Mains Cord NEMA 5-15P 120VAC for Smart IP43 SKYLLA-S Phoenix - 2M Power CordThis plug is for 120V systems.  One end plugs into the Phoenix Smart I...

Interface MK3-USB-C - VE.Bus to USB-C AdapterThe MK3-USB-C allows the following products to connect to a computer for configuration and firmware u...

Interface MK3-USB (VE. BUS to USB) ModuleThe MK3-USB allows the following products to connect to a computer for configuration and firmware updates...

RJ45 UTP - 0.9M CableA cable to connect Phoenix Inverter Control, VE Interface MK3-USB, and VE.Bus connections between multiple VE.Bus devices and...

Cerbo GX MK2Victron's Cerbo GX MK2 is the most commonly used GX product. This communications center has hardware revision 2 with two VE.Can ports,...

VE. Direct - 5M Cable (1 Side Right Angle Connector)Features: Cable Length: 5M 1 Side Right Angle Connector Warranty InfoWARNING: This product can...

SolidSwitch 104 for DC Loads Up To 70V/4AFeatures: The SolidSwitch 104 will switch DC loads of up to 70V/4A and can be controlled by a low-power d...

VE. Direct - 0.3M Cable (1 Side Right Angle Connector)Features: Cable Length: 0.3M 1 Side Right Angle Connector Warranty InfoWARNING: This product...

VE. Can to NMEA 2000 Micro-C Male CableUse this cable to connect a Victron product with a VE. Can port to a NMEA2000 network.Warranty InfoWARNING:...

VE.Direct Cable - 3M The Victron VE.Direct Cable is used to link Victron Energy devices that are VE.Direct equipped. The connection between the de...

VE.Direct Cable - 1.8MThe Victron VE.Direct Cable is used to link Victron Energy devices that are VE.Direct equipped. The connection between the d...

Wall Mount for Blue Smart IP65 Chargers - 12/10, 12/15 & 24/8This Wall Mount will be especially useful if you like to keep your smart charger ...

Smart Battery Sense Long Range (Up to 10M)The VE.Bus Smart dongle is a Bluetooth Smart enabled VE.Bus interface, with battery temperature-and-volt...

Cerbo GXThis communication-center allows you to always have perfect control over your system from wherever you are and maximises its performance. ...

Temperature Sensor for BMV-712 Smart & BMV-702Victron's Temperature Sensor specifically for the BMV-712 and the BMV-702.Warranty InfoWARNING: ...

Temperature Sensor for Quattro, MultiPlus & GX DevicesA temperature sensor for MultiPlus or Quattro Inverter Charger and also GX Devices.Pleas...

RJ45 UTP - 5M CableA cable to connect Phoenix Inverter Control, VE Interface MK3-USB, and VE.Bus connections between multiple VE.Bus devices and G...

VE. Bus Smart DongleThe VE.Bus Smart dongle is two products in one:First of all it is the bluetooth accessory for our range of inverter/chargers: ...

GX Touch 70 Wall MountThe GX Touch wall mount accessory allows easy mounting of the GX Touch on a solid wall. No drilling or cut-out is required, ...

Ekrano GXThe Ekrano GX represents the next generation in the GX product family. With its complete range of connections and interfaces as well as i...

GX LTE 4G-A Cellular Modem for GX Devices - North America OnlyThe GX LTE 4G is an accessory for GX devices. It is a cellular modem that supports 2...

GlobalLink 520 4G LTE-M Remote Monitoring Device with 5-Year Pre-Paid SIM Card Uses AT & T & T-MobileWe believe that having insight into y...

RJ45 Splitter 1X Male - 2X Female - 15cm CableFeatures: 1X Male 2X Female Cable Length: 15cm Warranty InfoWARNING: This product can expose you to ...

Digital Multi Control 200/200AThis panel is intended both for Multis and Quattros. It allows PowerControl and PowerAssist current limit setting fo...

Digital Multi Control 200/200A GXThe Digital Multi Control is used to remotely view and adjust AC input currents, and turn on and off the Multi or...

VE. Direct - 3M Cable (1 Side Right Angle Connector)Features: Cable Length: 3M 1 Side Right Angle Connector Warranty InfoWARNING: This product can...

GX Touch 70 Protection CoverThe GX Touch 70 protection cover prevents damage from UV light during prolonged exposure to the sun. Specification:Mod...

GX Touch 50 Panels & System MonitoringThe GX Touch 50 is the display accessory for our Cerbo GX. The five inch a touch screen display gives an...

Carry Case for BlueSmart IP65 Chargers & AccessoriesSmart and professional; this new snap shut carry case provides protective stowage and easy...

RJ45 UTP - 10M CableA cable to connect Phoenix Inverter Control, VE Interface MK3-USB, and VE.Bus connections between multiple VE.Bus devices and ...

GX Touch 50 Wall MountThe GX Touch wall mount accessory allows easy mounting of the GX Touch on a solid wall. No drilling or cut-out is required, ...

RJ12 UTP Cable - 10MA cable to connect the BMV shunt to the BMV head unit. An RJ12 cable ships standard with a BMV battery monitor, but if this ca...

SmartSolar MPPT 150/60-TRThe Victron SmartSolar MPPT 150/60 Solar Charge Controller is Bluetooth accessible via either built-in Bluetooth or the V...

GX Tank 140 Tank Monitoring for 4-20 MA, 1-10VDC Sensors - Monitors Up to 4 Sensors *Sensor Not IncludedThe GX Tank 140 takes readings from up to ...

RJ12 UTP Cable - 0.3MA cable to connect the BMV shunt to the BMV head unit. An RJ12 cable ships standard with a BMV battery monitor, but if this c...

Cerbo-S GX Basic Version - Limited Inputs No BMS Can PortThe communication center allows you to always have perfect control over your system from ...

Battery Indicator Eyelet M8 (30A ATO Fuse)The Battery Indicator Eyelet M8 is an accessory for the Blue Smart IP65 Chargers.Please contact your dea...

GX Touch 50 Adapter for CCGX Cut-OutThis adapter is designed to easily replace the CCGX display with the newer GX Touch. Contents of the packaging...

Color Control GX Monitor - Button ControlThe Color Control GX is the communication-centre of your installation. It offers at-a-glance live informa...

CCGX Wi-Fi Module Simple (Nano USB)Use to connect a Victron Color Control GX to a wireless network.  Enter the wireless ID and Passwords using the...