Raymarine 2" Pedestal Socket f/Tiller Pilots
Raymarine
2" Pedestal Socket For Tiller PilotsAllows for horizontal mounting of the tiller pilot when the fixed end of the pilot is lower than the tiller arm.
Buy the best brands of marine navigation equipment, instruments and other marine navigation electronics at discount prices from CE Marine. We offer flat rate shipping and can help you locate hard to find items or we can recommend alternatives.
Call us today at 1-414-254-1559 for personalized service and help locating/replacing hard to find marine navigation equipment.
2" Pedestal Socket For Tiller PilotsAllows for horizontal mounting of the tiller pilot when the fixed end of the pilot is lower than the tiller arm.
SR100 / SR50 Audio CableThe SR100/SR50 audio cable runs from the 4-pin audio output port to your boat's onboard audio or entertainment system deliv...
View full detailsThis power and data cable has bare wires at the end so you can hard wire your GPS or fishfinder directly to a DC power source or other electronic d...
View full detailsPlug your unit's cigarette lighter adapter into this charger's standard 12-volt cigarette lighter receptacle. Then plug the charger into a wall out...
View full detailsProtective hard cover for all 1100 Series products. Color: white. Not for use while trailering boat.
Protective hard cover for some 900 Series products. Color: white. Not for use while trailering boat.
In-dash mounting kit - Kit allows indash mounting of all 1100 Series Products. Requires an opening of 11.5"W X 7.25"H.
Mount any additional chartplotter on your boat with this second mounting station.
Flush mount gasket for GPSMap 4010 and 4210.
Right angle power cable for GPSMap 4010, 4210, 5015, 5215
Top and bottom snap-on cover for Fishfinder 300C
Safeguard your Fishfinder 300C with this protective cover.
Second Station mounting kit for GPSMap 4008 & 4208
Power/data cable (bare wires)This power and data cable has bare wires at the end so you can hard wire your GPS directly to a DC power source or som...
View full detailsUC-4Unit CoverFits all 300 and 100 Series
UC-MMatrix & 500 Series Unit CoverAll Matrix (except Matrix 97) and 500 Series
In-dash mounting kit - Allows in-dash mounting of all 800 & 900 Series products. Requires an opening of 10-1/16"W x 4-15/16"H.
RF Wireless MousePart #: 010-10879-00Plug & play optical mouse to remotely control GPSMAP® 5000/7000 series touchscreen chartplotter displays. ...
View full detailsRF Wireless Remote ControlUse this portable keyed remote to wirelessly control GPSMAP® 4000 or 5000 series chartplotter displays. Two AAA batteries...
View full detailsSB-9BLSwitches 2 Transducers between 1 Sonar unit.Works with: LCX-110C, LCX-111C HD, LCX-112C, LCX-113C HD, LCX-17M, LCX-20C, LCX-25C, LCX-26C HD, ...
View full detailsGPS AntennaStandard Horizon's replacement antenna specifically made for CP150/160/170 series chartplotters.
Replacement A/C Charger Compatible Units: GPSMAP 276C GPSMAP 376C GPSMAP 378 GPSMAP 478
Marine mounting bracket (replacement)
Serial to USB AdapterDescription: This adapter cable converts an AS PC2, which has a serial port connector, to a USB connection.For Use With: Matri...
View full detailsUnit CoverThe Unit Cover protects the unit when not in use. Protects from debris and scratchesDescription: Protective hard cover for all 700 Series...
View full detailsData CardMax out the memory in your GPS unit with Garmin's data card. Holds up to 512MB of data from Mapsource CD-ROMs so you can download a ton o...
View full detailsIn-Dash Mounting KitThe In-Dash Mounting Kit provides the capability to install a unit in the dash. The same rugged construction as the unit makes ...
View full detailsIn-Dash Mounting KitThe In-Dash Mounting Kit provides the capability to install a unit in the dash. The same rugged construction as the unit makes ...
View full detailsAntenna Cable Assembly, 15 Meters
16 Channel GPS ReceiverWith the GPS Receiver, you can access advanced trackplotter and navigation capabilities of your Fishing System.Key Features:...
View full detailsRail mount adapter (replacement for all rail/bike mount accessories). For use with optional bike or rail mount accessory.
15 Meter Signal Cable Assembly
10 Meter Signal Cable AssemblyReplacement Cable For: 1733C 1734C
15 Meter Signal Cable Assembly
15 Meter Signal Cable Assembly
DST521The DST521 TRIDUCER multisensor is Standard's most-affordable, dual-frequency, 50/200 kHz, transom-mount design. It combines depth, speed, an...
View full detailsTransducer Extension Cable, 10ft.The Transducer Extension Cables extend the location of transducers up to 50 feet without affecting accuracy or per...
View full detailsC-Series to DSM Interconnect Cable (3 meters)Used to connect the C-Series Multifunction display to the Digital Sonar Module (DSM).
Cable AssemblyRaymarine's 10m Cable Assembly for DSM300 to C-Series
E-Series Video In Cable, S-Video x2 (1.5m) 2-Channel S-Video Input Cable for connecting cameras, entertainment components, satellite television rec...
View full detailsE-Series Video Out Cable (20m)VGA Video Output cable for connecting E-Series to PC monitors, Plasma Television displays etc. 20 meter long cable wi...
View full detailsE-Series Video Out Cable (10m)VGA Video Output cable for connecting E-Series to PC monitors, Plasma Television displays etc.10 meter cable with wat...
View full detailsThis power and data cable has bare wires at the end so you can hard wire your chartplotter directly to a DC power source or other electronic device...
View full detailsJoin your mailing list!
CE Marine sells, installs, services and supports marine electronics, marine equipment and other marine supplies and provides professional marine consulting and engineering services to owners of recreational, commercial and government marine vessels.
C&E Marine Group, LLC
2035 County K
Hartford, WI 53027
1-414-254-1559
Copyright © 2024 CE Marine Electronics.