Lowrance Trolling Motor Transducer Bracket f/DSI [000-10261-001]
Lowrance
Attaches transducer to a trolling motor.Works with: Elite-5 DSI, Elite-5x DSI, Mark-5x DSI Specifications: Type: Mounting Brackets Box Dimensions:...
View full detailsLowrance Electronics, Inc., has been a world leader in the design, manufacture and marketing of high-quality sport fishing SONAR and Global Positioning System (GPS) mapping instruments for over 45 years. With nearly 45 years continuous manufacturing
We offer flat rate shipping and can help you locate hard to find items or we can recommend alternatives.
Call us today at 1-414-254-1559 for personalized service and help locating / replacing hard to find marine electrical equipment.
Attaches transducer to a trolling motor.Works with: Elite-5 DSI, Elite-5x DSI, Mark-5x DSI Specifications: Type: Mounting Brackets Box Dimensions:...
View full detailsTM Transducer for DSI with TempDual frequency DSI Skimmer transducer 455/800kHz with built in temp. Includes 20ft cable, mounting bracket and hard...
View full detailsNEP-2 Network Expansion PortLowrance NEP-2 Network Expansion Port-2 plug-and-play hub for high-speed data-sharing of multiple HDS, LCX,and LMS pro...
View full detailsSimNet to N2K Adaptor Kit - Connect Simrad heading sensor (FC40, RC42) toNMEA 2000 network; includes Simnet-to-N2k male adaptor, Simnet-2 Joiner,T...
View full detailsGimbal Knob Set for all HDS units. Included with purchase of GB-19 gimbal bracket. Specifications: Type: Mounting Brackets Box Dimensions: 1"H x 3...
View full detailsWorks with: IntelliMap 320, IntelliMap 480, IntelliMap 500C, IntelliMap 502C iGPS, IntelliMap 642C iGPS, Elite-5M Specifications: Type: Power Cord...
View full detailsBracket for Mark/Elite 4 & 5 models.Works with: Lowrance Elite-5, Elite-5m, Elite-5x, Mark-5x, Mark-5x Pro, Simrad go5 Specifications: Type: M...
View full detailsRugged, high-speed, moisture and solvent-resistant data cable withstand the toughest onboard marine environments. For Lowrance models with 5-pin ...
View full detailsExtension Cable For LSS-1 or LSS-2 TransducerFor use specifically with Lowrance's LSS-1 or LSS-2 Transducer. If the 20' transducer cable is not l...
View full detailsShoot-thru-hull mount, 20 degree pod type with remote temperature (200 kHz). Includes power cable (20 ft. cable). Specifications: Cable Length (F...
View full details6' Extension cable fits all 2007 and newer Ethernet-enabled Lowrance units with 5-pin yellow connector Specifications: Cable Length (Feet): 6' Box...
View full detailsNMEA Starter Kit Network starter kit. Includes 2 terminating resistors (TR-120M-RD, TR-120F-RD), two T-connectors (N2K-T-RD), one 2 ft extension c...
View full detailsPower cable for all HDS units: HDS-10, HDS-10m, HDS-5, HDS-5m, HDS-5x, HDS-7, HDS-7m, HDS-8, HDS-8m, Elite-7 Hdi Series Specifications: Type: Pow...
View full detailsGimbal Bracket and knobs for HDS-7 units (HDS-7, HDS-7m) NON TOUCH Specifications: Type: Mounting Brackets Box Dimensions: 3"H x 5"W x 9"L WT: 0.5...
View full detailsPTI-WSUPortable-mount, 20 degree ice fishing type (200 kHz). Includes power cable. (7 ft cable)Works with: X67C Specifications: Temperature: No Sp...
View full detailsB60 Tilted Element 12°12° tilted version is designed for 8° - 15° deadrise anglesThe bronze B60-12° provide a vertical beam without a fairing. In...
View full detailsETHEXT-25YL25 ft. Ethernet CableWorks with: Broadband Sounder-1, GlobalMap 5200C, GlobalMap 5300C iGPS, GlobalMap 7200C, GlobalMap 7300C HD, Globa...
View full detailsNAC-MRD2MBLNMEA 2000 network adapter cable. Adapts a blue connector device to a red connector network.Works with: NMEA 2000 Compliant Units Specif...
View full detailsRugged, high-speed, moisture - and solvent-resistant data cables withstand the toughest onboard marine environments. For Lowrance models with 5-p...
View full detailsYamaha Engine Interface CableYamaha engine interface cable 4.5 m (15 ft) and T-connectorConnects to Yamaha engines without Yamaha CommandLink Plus...
View full detailsEvinrude Engine Interface Cable - RedInterface between an Evinrude engine and NMEA network to display engine data. Comes with a T connector. For u...
View full detailsNAC-FRD2FBLNMEA network adapter cable. Adapts red connector devices to a blue connector network.Works with: NMEA 2000 Compliant Units
T-ConnectorFor use with red NMEA network Specifications: Data Interface: NMEA 2000 Box Dimensions: 2"H x 3"W x 5"L WT: 0.1 lbs UPC: 042194529677
N2K-PWR-RD Power CableLowrance's Power Cable comes with a T-Connector and is for use with red NMEA network.Compatible Devices:NMEA 2000 Compliant ...
View full detailsN2KEXT-2RD 2' NMEA 2000 Cable2' NMEA 2000 Cable Specifications: Data Interface: NMEA 2000 Cable Length (Feet): 2' Box Dimensions: 2"H x 4"W x 7"L ...
View full detailsN2KEXT-15RD 15' NMEA 2000 Cable15' NMEA 2000 Cable Specifications: Data Interface: NMEA 2000 Cable Length (Feet): 15' Box Dimensions: 3"H x 4"W x ...
View full detailsPC-27BLPower Cable. For use with LCX-112C, LCX-113C HD, LCX-27C, LCX-28C HD, LCX-37C, LCX-38C HD, LMS-520C, LMS-522C Igps, LMS-525C DF, LMS-527C D...
View full detailsMB-7R-A-M 1" ball mount bracket with arm and mounting plate.Works with: Accura 240, Cuda 168 EX, FishEasy 2, FishElite 320, FishElite 480, FishEli...
View full detailsMB-8R-A-M 1-1/2" ball mount bracket with long arm and mounting plate.Works with: FishMark 160, FishMark 240, GlobalMap 1000, GlobalMap 2000, Globa...
View full detailsXT-20BL20' transducer extension cable.Works with: LCX-110C, LCX-111C HD, LCX-17M, LCX-20C, LCX-25C, LCX-26C HD, LMS-332C, LMS-334C iGPS, LMS-337C ...
View full detailsXT-12BL12' transducer extension cable.Works with: LCX-110C, LCX-111C HD, LCX-17M, LCX-20C, LCX-25C, LCX-26C HD, LMS-332C, LMS-334C iGPS, LMS-337C ...
View full detailsPDT-WBLTrolling motor-mount, pod type with built-in temperature sensor.Works with: LCX-110C, LCX-111C HD, LCX-17M, LCX-20C, LCX-25C, LCX-26C HD, L...
View full detailsShoot-Thru-Hull, wide cone angle, 200 kHz "POD" transducer with external temperature sensor. Specifications: Temperature: Yes Speed Included: No...
View full detailsCA-8 Cigarette Plug Power CableEasy to use and fits any 12 Volt CLA receptacle.Compatible Devices: GlobalMap 3300C, GlobalMap 3500C, GlobalMap 36...
View full detailsHST-WSUTransom mount, 20 degree skimmer (200Khz) with built-in temperature. Includes power cable.Works with: Cuda 128, Cuda 128 P, Cuda 168, Cuda ...
View full detailsHST-DFSBLTransom-mount, dual frequency skimmer with built-in temperature sensor.Works with: LCX-110C, LCX-111C HD, LCX-17M, LCX-20C, LCX-25C, LCX-...
View full detailsJoin your mailing list!
CE Marine sells, installs, services and supports marine electronics, marine equipment and other marine supplies and provides professional marine consulting and engineering services to owners of recreational, commercial and government marine vessels.
C&E Marine Group, LLC
2035 County K
Hartford, WI 53027
1-414-254-1559
Copyright © 2024 CE Marine Electronics.