Maretron Temperature Sensor f/ DCM100 [TR3K]
Maretron
The TR3K temperature probe is for use with the Maretron TMP100 Temperature Module (optional extra) or the DCM100 DC Monitor (it is included with t...
View full detailsThe TR3K temperature probe is for use with the Maretron TMP100 Temperature Module (optional extra) or the DCM100 DC Monitor (it is included with t...
View full detailsTLA100 NMEA 2000®Tank Level AdapterThe TLA100 is used to adapt commercially available resistive tank senders to the NMEA 2000® network. This allo...
View full detailsThe TLM100 is used to sense levels of liquid tanks using ultrasonic technology and transmit the liquid levels over the NMEA 2000 network. This all...
View full detailsThe TLM150 is used to sense levels of gasoline tanks using ultrasonic technology and transmit the gasoline levels over the NMEA 2000 network. Thi...
View full detailsMaretron's TMP100 measures the temperature for up to 6 temperature probes and reports the information over an NMEA 2000 network. The TMP100 suppo...
View full detailsUSB100 NMEA 2000® / USB GatewayMaretron's USB100 is a gateway for bridging USB equipment using NMEA 0183 sentences - such as an on-board computer...
View full detailsMicro Double-Ended Cordset - 0.5M - *Case of 6*Mechanical Contact Carrier Mat/Color: Thermoplastic PUR/Blue-Gray Molded Body Mat/Color: Thermoplas...
View full details4-Way Block for NMEA 2000 NetworksNavico's 4-Way Block accessory for NMEA 2000 Networks should be used wheremultiple drop-cables are required in c...
View full detailsEP-80R Temperature Sensor -NMEA2000 Transom MountReplaces EP-80 Pre-configured as Water Temperature Can be reconfigured* to output the following t...
View full detailsFluid Level SensorTransmits the tank level from a suitable tank level sender unit on the the NMEA 2000 network. Replaces EP-65 Reports Tank Fluid ...
View full detailsFuel Data ManagerMonitors Fuel Rate/Fuel Flow from NMEA 2000 engines, and accumulates Fuel Rate into Fuel Used. Outputs seasonal, trip and total f...
View full detailsNMEA 2000 Cable - 6MFeatures: Length: 6M NMEA 2000 Cable Specifications: Cable Length (Feet): 20' Data Interface: NMEA 2000 Box Dimensions: 1"H x...
View full detailsTransom Mount Speed SensorTransom-mount paddle wheel 3.1 m (10ft) cable with Micro-C connector.Features Replaces EP-70 Outputs speed through wate...
View full detailsTemperature Sensor Thru-HullReplaces EP-80 Pre-configured as Water Temperature Can be reconfigured* tooutput the following temperature types: Outs...
View full detailsBackbone Cables In a SeaTalkng installation, a backbone cable runs through the length of the boat. Individual devices connect to the backbone ...
View full detailsSpur CableRaymarine 1 meter Spur Cable for SeaTalkng Specifications: Cable Length (Feet): 3' Box Dimensions: 1"H x 6"W x 7"L WT: 0.05 lbs UPC: 723...
View full detailsSpur CableRaymarine 1 meter stripped end Spur Cable for SeaTalkng Specifications: Cable Length (Feet): 3' Box Dimensions: 1"H x 3"W x 4"L WT: 0.2 ...
View full detailsBackbone Cables In a SeaTalkng installation, a backbone cable runs through the length of the boat. Individual devices connect to the backbone ...
View full detailsBackbone Cables In a SeaTalkng installation, a backbone cable runs through the length of the boat. Individual devices connect to the backbone ...
View full detailsSpur CableRaymarine 3 meter Spur Cable for SeaTalkng Specifications: Cable Length (Feet): 10' Box Dimensions: 1"H x 7"W x 8"L WT: 0.5 lbs UPC: 723...
View full detailsSpur CableRaymarine 3 meter stripped end Spur Cable for SeaTalkng Specifications: Cable Length (Feet): 10' Box Dimensions: 1"H x 4"W x 4"L WT: 0.3...
View full detailsBackbone Cables In a SeaTalkng installation, a backbone cable runs through the length of the boat. Individual devices connect to the backbone ...
View full detailsSpur CableRaymarine 400MM elbow Spur Cable for SeaTalkng Specifications: Cable Length (Feet): 1' Box Dimensions: 1"H x 1"W x 1"L WT: 0.1 lbs UPC: ...
View full detailsSpur CableRaymarine 400MM Spur Cable for SeaTalkng Specifications: Cable Length (Feet): 1' Box Dimensions: 1"H x 6"W x 7"L WT: 0.05 lbs UPC: 72319...
View full detailsBackbone Cables In a SeaTalkng installation, a backbone cable runs through the length of the boat. Individual devices connect to the backbone ...
View full detailsBackbone Cables In a SeaTalkng installation, a backbone cable runs through the length of the boat. Individual devices connect to the backbone ...
View full detailsAutopilot Backbone Cable KitThis autopilot backbone cable kit is required to connect the X-10, X-30, X-CAN and X-SOL corepacks to the ST70 Autopil...
View full detailsAXIOM Power Cable 1.5M Right Angle & NMEA 2000 ConnectorFeatures: AXIOM Power Cable 1.5M Right Angle NMEA 2000 Connector 90° Specifications: ...
View full detailsBlanking Plug f/SeaTalk ngThis blanking plug is a blanking plug for the SeaTalkng. Place blanking plug in unused SeaTalkNG Spur sockets to protect...
View full detailsDevicenet Female ADP Cable - SeaTalkng - NMEA 2000Adapts SeaTalkng to NMEA2000 network. For use with E & C Series Widescreen, G Series, and ST...
View full detailsDevicenet Male ADP Cable SeaTalkng to NMEA 2000Adapts SeaTalkng to NMEA2000 network. For use with E & C Series Widescreen, G Series, and ST70 ...
View full detailsSeaTalk 1 to SeaTalkng Converter KitThe SeaTalk 1 to Seatalkng converter allows select SeaTalk 1 devices to interface and communicate on the Rayma...
View full detailsEvolution Cabling Kit - R70160 The Evolution SeaTalkng cable kit contains: 1 x SeaTalkng Power Cable (0.4m)t 1 x SeaTalkng Backbone Cable (5m)t 1 ...
View full detailsRaymarine In-Line TerminatorIn-Line SeaTalkng Terminator f/Long Cable Runsold part number a80001 , now its a06074
5-way SeaTalkng Connector used for connecting spurs to the backbone.
The SeaTalkng Backbone kit contains everything you need to construct and wire a basic SeaTalkng navigation network backbone on board your vessel. ...
View full detailsSeaTalkng Backbone Extender for extending blue SeaTalkng Backbone Cables.
SeaTalkng Terminators attach at each end of SeaTalk backbone. Two are required per system.
Raymarine SeaTalkng Starter Kit SeaTalkng is a robust cabling and connection system compatible with NMEA 2000, built specifically for the marine e...
View full detailsSeaTalkngT-Piece Connector. Used for connecting white SeaTalkng Spur Cables to Blue SeaTalkng Backbone Cables.
VHF NMEA0183 To SeaTalkng Converter KitRaymarine's VHF NMEA0183 to Seatalkng Converter Kit is used for connecting an Isolated NMEA0183 VHF to the ...
View full detailsSimrad SimNet Product to NMEA 2000 Network Adapter CableThe Simrad SimNet Product to NMEA 2000® Network Adapter Cable, manufactured by Simrad, is ...
View full detailsJoin your mailing list!
CE Marine sells, installs, services and supports marine electronics, marine equipment and other marine supplies and provides professional marine consulting and engineering services to owners of recreational, commercial and government marine vessels.
C&E Marine Group, LLC
2035 County K
Hartford, WI 53027
1-414-254-1559
Copyright © 2024 CE Marine Electronics.