Garmin GWS™ 10 & GMI™ 10 Bundle
GWS™ 10 & GMI™ 10 Bundle
The GWS 10 wind sensor puts even more control in the hands of the sailor, allowing you to maximize the performance and speed of your boat with the use of wind vane technology.
Discover the Benefit of Harnessed Wind Power
The GWS 10 uses a wind vane for detection of wind direction and an anemometer to register wind speed. These measurements enhance your boats potential as you adjust your sail accordingly to harness the winds strength. Besides delivering wind measurements, the GWS 10 captures barometric pressure and air temperature data. When combined with other sensors, the GWS 10 provides those on board the ability to gather specific wind data such as ground and true wind, wind VMG and track heading.
Enjoy the Simple Interface & NMEA 2000 Connectivity
Combining wind and weather measurement from a single, integrated sensing unit, the GWS 10 installs with ease - providing data output to your cockpit display via NMEA 2000 cable and bus, which powers the unit. The GWS 10 is designed to interface with Garmins GMI 10 universal marine instrument, the 4000 and 5000 chartplotter series or any manufacturers NMEA 2000-enabled chartplotters and displays.
The GMI 10 Digital Marine Instrument Display adds a new dimension of flexibility for boaters who want a fully integrated marine instrument system.
Simplify Marine Instrumentation
The GMI 10 improves upon the traditional method of marine instrumentation, in which standard marine instruments have their own dedicated display. By displaying data from multiple remote sensors on one screen, the GMI 10 offers a streamlined approach to marine instrumentation.
Mariners can use the GMI 10 to display instrument data such as depth, speed through the water, water temperature, fuel flow rate, engine data, fuel level, wind direction and more, depending upon what sensors are connected. In fact, the GMI 10 supports more than 2 dozen standard NMEA 2000r and more than 20 NMEA 0183 data sentences.
Connects with the Garmin Marine Family of Marine Sensors
Featuring a bright, 3.5" (8.89 cm) QVGA screen in a sleek 4" (10.16 cm) flush-mount bezel, the GMI 10 serves as the hub of a family of integrated Garmin marine sensors, all connected via NMEA 2000 or NMEA 0183 data ports.
The GMI 10 marine instrument family consists of the GFS 10 fuel sensor, GWS 10 Wind Sensor, GRA 10 Rudder Angle Adapter, GET 10 Engine Tilt Adapter, GFL 10 Fluid Level Adapter, GBT 10 Bennett Trim Tab Adapter, GST 10 Water Speed and Temperature Adapter, NMEA 2000 and NMEA 0183 Intelliducers and the GPS 17x high sensitivity receiver/antenna.
With integration via NMEA 2000 ports, any of these units can be added or removed from the NMEA 2000 bus without affecting other units on the bus. For easy installation, the latest version of the GMI 10 is powered exclusively through the NMEA 2000 network. While the GMI 10 supports NMEA 0183 Transmit and Receive, installs now will require an NMEA 2000 connection for power. As a result, the GMI 10 also is not backwards compatible to existing power cable connections. These units also can connect to any Garmin Marine Network chartplotters that have a NMEA 2000 port.